Bound and mobile soil water isotope ratios are affected by soil texture and mineralogy,whereas extraction method influences their measurement     

Rachel E. Adams  Ayumi Hyodo  Toby SantaMaria  Cynthia L. Wright  Thomas W. Boutton  Jason B. West 《水文研究》2020,34(4):991-1003

Questions persist about interpreting isotope ratios of bound and mobile soil water pools, particularly relative to clay content and extraction conditions. Interactions between pools and resulting extracted water isotope composition are presumably related to soil texture, yet few studies have manipulated the bound pool to understand its influence on soil water processes. Using a series of drying and spiking experiments, we effectively labelled bound and mobile water pools in soils with varying clay content. Soils were first vacuum dried to remove residual water, which was then replaced with heavy isotope-enriched water prior to oven drying and spiking with heavy isotope-depleted water. Water was extracted via centrifugation or cryogenic vacuum distillation (at four temperatures) and analysed for oxygen and hydrogen isotope ratios via isotope ratio mass spectrometry. Water from centrifuged samples fell along a mixing line between the two added waters but was more enriched in heavy isotopes than the depleted label, demonstrating that despite oven drying, a residual pool remains and mixes with the mobile water. Soils with higher clay + silt content appeared to have a larger bound pool. Water from vacuum distillation samples have a significant temperature effect, with high temperature extractions yielding progressively more heavy isotope-enriched values, suggesting that Rayleigh fractionation occurred at low temperatures in the vacuum line. By distinctly labelling bound and mobile soil water pools, we detected interactions between the two that were dependent on soil texture. Although neither extraction method appeared to completely extract the combined bound and mobile (total water) pool, centrifugation and high temperature cryogenic vacuum distillations were comparable for both δ²H and δ¹⁸O of soil water isotope ratios.  相似文献   

A synthesis of iron deposits in the eastern Tianshan,NW China     

《地学前缘(英文版)》2020,11(4):1271-1287

The northern Xinjiang region is one of the most significant iron metallogenic provinces in China.Iron deposits are found mainly within three regions:the Altay,western Tianshan,and eastern Tianshan orogenic belts.Previous studies have elaborated on the genesis of Fe deposits in the Altay orogenic belt and western Tianshan.However,the geological characteristics and mineralization history of iron deposits in the eastern Tianshan are still poorly understood.In this paper I describe the geological characteristics of iron deposits in the eastern Tianshan,and discuss their genetic types as well as metallogenic-tectonic settings,Iron deposits are preferentially distributed in central and southern parts of the eastern Tianshan.The known iron deposits in the eastern Tianshan show characteristics of magmatic Fe-Ti-V(e.g.,Weiya and Niumaoquan),sedimentary-metamorphic type(e.g.,Tianhu),and iron skarn(e.g.,Hongyuntan).In addition to the abovementioned iron deposits,many iron deposits in the eastern Tianshan are hosted in submarine volcanic rocks with well-developed skarn mineral assemblages.Their geological characteristics and magnetite compositions suggest that they may belong to distal skarns.SIMS zircon U-Pb analyses suggest that the Fe-Ti oxide ores from Niumaoquan and Weiya deposits were formed at 307.7±1.3 Ma and 242.7±1.9 Ma,respectively.Combined with available isotopic age data,the timing of Fe mineralization in the eastern Tianshan can be divided into four broad intervals:Early Ordovician-Early Silurian(476-438 Ma),Carboniferous(335-303 Ma),Early Permian(295-282 Ma),and Triassic(ca.243 Ma).Each of these episodes corresponds to a period of subduction,post-collision,and intraplate tectonics during the Paleozoic and Mesozoic time.  相似文献   

超慢速扩张环境下超镁铁质岩系统的热液硫化物成矿机理以及启示     

曹红  孙治雷  刘昌岭  姜学钧  何拥军  黄威  尚鲁宁  王利波  张喜林  耿威  施美娟  李东义 《海洋学报》2018,40(4):61-75

西南印度洋63.5°E热液区是在超慢速扩张洋脊发现的首个超镁铁质岩热液系统。对取自该区的热液硫化物样品进行了系统的矿物学和地球化学分析，矿物学分析结果表明:该热液区硫化物为富Fe型高温硫化物，且经历了较深程度的氧化蚀变，大量中间态的Fe氧化物充填在硫化物矿物间的孔隙及内部解理中；这些硫化物相以白铁矿为主，其次是等轴古巴矿和少量铜蓝，缺乏黄铁矿、闪锌矿。据推断，该区的热液成矿作用分为4个阶段:低温白铁矿阶段→高温等轴古巴矿阶段→自形白铁矿阶段→后期海底风化阶段（少量铜蓝以及大量的Fe的羟氧化物）。与之相对应，地球化学分析结果表明这些硫化物的Fe含量较高（31.57%~44.59%），Cu含量次之（0.16%~7.24%），而Zn含量普遍较低（0.01%~0.11%）；微量元素较为富集Co（328×10-6~2 400×10-6）和Mn（48.5×10-6~1 730×10-6）。该区硫化物中较高含量的Fe、Co与超镁铁质岩热液系统相似，明显高于镁铁质岩热液系统。独特的热液硫化物矿物学特征和元素组成可能与该区普遍出露的地幔岩、橄榄岩蛇纹石化作用以及拆离断层的广泛发育的环境有关。  相似文献   

基于FLAC3D数值模拟的清徐地裂缝与交城断裂成因关系研究     

曾金艳  李自红  陈文 《震灾防御技术》2020,15(1):114-122

基于断裂力学理论，应用FLAC3D数值模拟方法对交城断裂活动时附近土体的变形特征进行模拟计算。计算结果表明:断层活动带动上覆土层差异沉降及应力场变化，当断层错动量达到一定程度，断层附近出现拉应力区，土体在拉张应力和自身重力作用下产生垂直差异形变，从而产生地裂缝。将数值模拟结果与方山探槽揭示的地裂缝剖面特征进行对比，二者结果相互印证，说明清徐地裂缝是交城断裂活动的结果，二者具有明显的对应关系，地裂缝为构造成因裂缝。数值模拟结果为研究断裂和地裂缝成因关系提供了佐证。  相似文献   

内蒙古得尔布干成矿带铅锌银矿两期叠加成矿的矿物学证据--以乌尔根矿为例     

魏灿坤  温守钦  杨天瑶  杨红章  张光亮  李建源  谢伟  闫莹灿  张帅 《矿物学报》2020,(2):201-212

内蒙古额尔古纳市乌尔根铅锌银矿是得尔布干成矿带上具有代表性的浅成中低温热液型铅锌银矿之一。显微镜下观察、电子探针分析结果等矿物学证据证明,该矿床存在2期成矿作用。其中早期火山热液形成的金属硫化物普遍受应力作用的改造,并广泛被晚期形成的矿物交代,典型矿物是不含乳滴状黄铜矿的闪锌矿,具有高含量Fe、Mn和低含量Cu的特征;晚期次火山(隐爆角砾岩)热液形成的金属硫化物占大多数,常交代早期形成的矿物并与其交生在一起,典型矿物是含固溶体乳滴黄铜矿的闪锌矿,并且具有中等含量Fe、Mn和高含量Cu的特征。在次火山热液期的晚阶段残余热液还形成了较为纯净的呈棕黄色-无色透明的纯净闪锌矿,具有高含量Zn,低含量Fe、Mn、Cu的特征。结合前人测定的研究区火山岩和矿石矿物定年结果以及火山岩主量元素组成数据,推测早期火山热液成矿与中基性塔木兰沟组火山岩关系密切,而晚期次火山(隐爆角砾岩)热液属于满克头鄂博组的(中)酸性岩浆热液的产物。隐爆角砾岩热液富含Cu元素且为成矿提供了主要物质来源,是研究区寻找除铅锌之外其他矿种的重要线索。  相似文献   

The thermal maturity of sedimentary basins as revealed by magnetic mineralogy     

Mansour M. Abdelmalak  Stéphane Polteau 《Basin Research》2020,32(6):1510-1531

The thermal evolution of sedimentary basins is usually constrained by maturity data, which is interpreted from Rock-Eval pyrolysis and vitrinite reflectance analytical results on field or boreholes samples. However, some thermal evolution models may be inaccurate due to the use of elevated maturities measured in samples collected within an undetected metamorphic contact aureole surrounding a magmatic intrusion. In this context, we investigate the maturity and magnetic mineralogy of 16 claystone samples from Disko-Svartenhuk Basin, part of the SE Baffin Bay volcanic margin. Samples were collected within thermal contact metamorphic aureoles near magma intrusions, as well as equivalent reference samples not affected by intrusions. Rock-Eval pyrolysis (T_max), and vitrinite reflectance (Ro) analysis were performed to assess the thermal maturity, which lies in the oil window when 435°C ≤ T_max ≤ 470°C and 0.6%–0.7% ≤ Ro ≤ 1.3%. In addition, we performed low- (<300K) and high-temperature (>300K) investigations of isothermal remanent magnetization to assess the magnetic mineralogy of the selected samples. The maturity results (0.37% ≤ Ro ≤ 2%, 22°C ≤ T_max ≤ 604°C) show a predominance of immature to early mature Type III organic matter, but do not reliably identify the contact aureole when compared to the reference samples. The magnetic assemblage of the immature samples consists of iron sulphide (greigite), goethite and oxidized or non-stoichiometric magnetite. The magnetic assemblage of the early mature to mature samples consists of stoichiometric magnetite and fine-grained pyrrhotite (<1 μm). These results document the disappearance of the iron sulphide (greigite) and increase in content of magnetite during normal burial. On the other hand, magnetite is interpreted to be the dominant magnetic mineral inside the contact aureole surrounding dyke/sill intrusions where palaeotemperatures indicate mature to over-mature state. Interestingly, the iron sulphide (greigite) is still detected in the contact aureole where palaeotemperatures exceeded 130°C. Therefore, the magnetic mineralogy is a sensitive method that can characterize normal burial history, as well as identify hidden metamorphic contact aureoles where the iron sulphide greigite is present at temperatures beyond its stability field.  相似文献   

邯邢地区中生代侵入岩中磷灰石的成因矿物学研究     

梁贤 《地质与勘探》2020,56(5):969-984

氧逸度为有效的氧分压，是实验岩石学中重要的研究课题，岩浆的氧逸度是继温度、压力、浓度等影响成岩成矿过程的关键性物理化学参数。本文利用磷灰石的氧逸度计，对邯邢地区六大主要岩体的岩浆氧逸度进行了计算。研究结果显示，样品中的磷灰石主要为羟-氟磷灰石，磷灰石的形态、成分和结构特征指示其为岩浆成因。磷灰石中的Mn元素在晶格中有两种方式，多以Mn3＋和Mn5＋的方式进入晶格。磷灰石氧逸度计计算的logfo2为-12.31~-9.75，均值-11.02。参考与磷灰石共生角闪石的形成温度，认为邯邢地区岩浆岩普遍具有较高的氧逸度。根据磷灰石氧逸度值与矿床规模的填图结果，认为并非氧逸度越高越有利于邯邢式铁矿的形成。结合矿物学填图等值线闭合的趋势，进而推断邯邢地区中部的符山和武安岩体深部可能仍存在较好的找矿远景。  相似文献   

基于匹配追踪和遗传算法的大地电磁噪声压制   总被引：1，自引：0，他引：1       下载免费PDF全文

李晋  燕欢  汤井田  张贤  李广  朱会杰 《地球物理学报》2018,61(7):3086-3101

针对匹配追踪计算量大、大地电磁数据处理效率低的问题，提出基于匹配追踪和遗传算法的大地电磁噪声压制方法.首先，利用Gabor原子构建过完备原子库，并对过完备原子库集合进行划分.然后，借助遗传算法的自适应性，快速搜寻最优匹配原子及所在位置.最后，运用最优匹配原子对待处理信号进行稀疏分解，重构有用信号.通过对计算机模拟的典型强干扰和矿集区实测大地电磁数据进行分析处理，实验结果表明，相对于匹配追踪和正交匹配追踪，文中所提方法能从过完备原子库中快速、自适应地选取最优匹配原子与不同噪声干扰类型高精度的匹配，极大地提升了计算效率；大地电磁时间域序列中的大尺度强干扰被有效剔除，视电阻率曲线更为光滑、连续，低频段的数据质量得到明显改善.  相似文献   

Assessing model of highway slope stability based on optimized SVM     

《China Geology》2020,3(2):339-344

Considering the geological hazards attributed to the highway slope, using a common simple model cannot accurately assess the stability of the slope. First, principal component analysis (PCA) was conducted to extract the principal components of six factors (namely, bulk density, cohesion, internal friction angle, slope angle, slope height, and pore water pressure ratio) affecting the slope stability. Second, four principal components were adopted as input variables of the support vector machine (SVM) model optimized by genetic algorithm (GA). The output variable was slope stability. Lastly, the assessing model of highway slope stability based on PCA-GA-SVM is established. The maximal absolute error of the model is 0.0921 and the maximal relative error is 9.21% by comparing the assessment value and the practical value of the test sample. The above studies are conducive to enrich the assessing model of highway slope stability and provide some reference for highway slope engineering treatment.  相似文献   

Factors influencing undrained strength of fine-grained soils at high water contents     

H. B. Nagaraj  M. V. Sravan  B. S. Deepa 《Geomechanics and Geoengineering》2018,13(4):276-287

Understanding the undrained strength of fine-grained soils has been of interest to geotechnical researchers from many practical considerations. In several civil engineering applications, water content of soil is quite high being near or above the liquid limit of soils, and understanding the factors responsible for imparting the strength of soil at high water contents is of great significance. Recently, it has been reported in the literature that the shear strength of soils at these limiting water contents has significant variation. However, the reasons and the factors that probably influence for this variation have not been reported in the literature. This experimental investigation is an attempt in the direction of understanding the reasons for the variation in the undrained strength at higher limiting water content, namely liquid limit considering the various influencing factors like clay mineralogy and fine-sand content present in soil used for determining liquid limit. The results from this study are quite revealing and have been explained based on the mechanisms controlling the undrained strength at liquid limit.  相似文献